Cookie Img
Call Us
Home » Products » Submersible Pumps » Non Clog Sewage Submersible Pump

Non Clog Sewage Submersible Pump

Non Clog Sewage Submersible Pump
Non Clog Sewage Submersible Pump
Send Inquiry
Product Code : 47
Product Description

Non Clog Sewage Submersible Pump

Jasco non-clog sewage submersible pumps are designed to handle raw sewage. It can handle solids up to 125mm. It can pump out fibrous material, plastics sheets & soft solids. It can also be provided with cutter / agitator arrangement. It can handle slurry, sludge, effluents etc. It can be installed either with Guide rail system or portable arrangement.

Jasco non-clog Sewage pumps are driven by 'F' class squirrel cage induction motor as per IP-68, suitable for 3 Phase,415 V, 50Hz a.c. supply. Impeller of the pump is directly mounted on the extended shaft of motor, motor is protected with thermistor control, moisture sensor, reverse direction rotation protection, two mechanical seals running in oil of adequate combination.

Stationary parts like motor body, oil chamber, volute etc. are of graded CI castings, shaft shall be S.S, heavy duty antifriction ball bearing shall be fitted. Impeller shall be graded C.I, / S.S. or as the clients requirement, multicore P.v.c. round cable, with double P.v.c. seathing, shall be connected as standard accessory. All assembly parts are made water tight by using suitable 'O rings/gaskets. Rotor & Impeller are dynamically balanced for vibration free rotation. All major CI parts are hydraulically tested at suitable pressure to avoid leakage while running.


  • Drainage & sewage System
  • Sludge, waste water, storm water
  • Effluent with slurry & solids
  • Transfer of suspended solid
  • Raw water pumping applications

Technical Specifications


up to 70 Mtrs


2000 cu.m./Hr


1.0 H.P. to 200 H.P.

Solid handling size

up to 125 mm


960/1450/2900 rpm.